§ 103I.401 — Elevator Borings
Plain-Language Summary
This section regulates elevator borings, which are holes drilled to install elevator hydraulic cylinders. A permit is required before constructing an elevator boring. The work must be done by a licensed elevator boring contractor. Specific construction standards and reporting requirements apply.
103I.401 ELEVATOR BORINGS.
§
Subdivision 1.Permit required.
(a) A person may not construct an elevator boring until a permit for the hole or excavation is issued by the commissioner.
(b) The elevator boring permit preempts local permits except local building permits, and counties and home rule charter or statutory cities may not require a permit for elevator borings. §
Subd. 2.License required.
A person may not construct an elevator boring unless the person possesses a well contractor’s license or an elevator boring contractor’s license issued by the commissioner. §
Subd. 3.Sealing.
A well contractor or elevator boring contractor must seal a hole or excavation that is no longer used for an elevator boring. The sealing must be done according to rules adopted by the commissioner. §
Subd. 4.Report.
Within 30 days after completion or sealing of an elevator boring, the person doing the work must submit a report to the commissioner on forms provided by the commissioner.
History:
1989 c 326 art 3 s 24; 1994 c 557 s 24; 1997 c 203 art 2 s 6; 2005 c 106 s 29
History: History: 1989 c 326 art 3 s 24; 1994 c 557 s 24; 1997 c 203 art 2 s 6; 2005 c 106 s 29